Writing for agents
Gives the rules for writing text agents read: skill descriptions as context pointers, what to keep inline and what to move to a separate file, completion criteria, leading words and pruning. Use when creating or editing a skill, AGENTS.md or CLAUDE.md.
writing-for-agents- Author
- Matt Pocock
- Source
- mattpocock/skills/skills/productivity/writing-for-agents @ abeeaf9
- License
- MIT · Copyright (c) 2026 Matt Pocock
About this skill
What it does
The skill is a reference for writing anything an agent reads: a skill, an AGENTS.md or CLAUDE.md, or a doc those files point to. It has no steps; the agent applies it while writing:
- A context pointer, such as a skill description or an
AGENTS.mdline naming a doc, decides by its wording when the agent reaches the material: trigger word first, one trigger per distinct case. - Always-loaded lines cost context load; every document a human must remember costs cognitive load.
- Three tiers: steps, in-file reference, and reference moved to another file behind a pointer. Inline what every branch needs; move out what only some reach.
- Each step ends on a clear, demanding completion criterion, or the agent finishes early.
- A leading word, one familiar term such as tight or red, replaces a repeated phrase. State the wanted behaviour instead of banning the unwanted one.
- Pruning: one source of truth, no copies of what
package.jsonor--helpsays, no instructions the model already follows.
SKILL-MECHANICS.md covers skill specifics: model-invoked versus user-invoked (disable-model-invocation: true), when to split a skill, and router skills that list user-invoked ones. agents/openai.yaml holds the name and short description for Codex.
When to use it, and when not
Use it when you create or edit a skill, or trim an overgrown AGENTS.md or CLAUDE.md.
It has no template or test procedure and cannot tell you whether the finished skill works.
How to run it
The install command below puts the whole folder in place. The agent picks the skill up by its description; to call it yourself:
- Claude Code:
/writing-for-agents, or ask for the skill by name. - Codex:
$writing-for-agents. - Cursor: type
/in the Agent chat and pickwriting-for-agents.
Example: /writing-for-agents Our CLAUDE.md is 600 lines. Cut it to pointers and list what moved where.
retro from the same pack loads this skill as its first step; install both.
How it differs from similar skills
Writing skills from Superpowers treats a skill as code: a baseline run on a subagent, the skill, then reruns until the agent complies. This skill covers the text and leaves testing out; use it for wording, Writing skills to prove the result. Context engineering for agents is about what to load into a session, from rules files to error output, not how to write those files. AGENTS.md and CLAUDE.md writer from Sentry produces one concrete file: a short AGENTS.md with default sections and commands checked against the repository. Skill creator with evals and Skill writer by the Agent Skills spec take a skill from draft to test runs or validation; this skill is the reference for how to word it.
Install
Run one command — it saves SKILL.md and the files it uses into your agent's skills folder. Claude Code and Codex pick up a new skill without a restart; if it does not show up, restart the agent.
curl -fsSL --create-dirs -o ~/.claude/skills/writing-for-agents/SKILL.md https://anymodel.org/en/skills/matt-pocock/writing-for-agents/SKILL.md -o ~/.claude/skills/writing-for-agents/LICENSE https://anymodel.org/en/skills/matt-pocock/writing-for-agents/LICENSE -o ~/.claude/skills/writing-for-agents/SKILL-MECHANICS.md https://anymodel.org/en/skills/matt-pocock/writing-for-agents/SKILL-MECHANICS.md -o ~/.claude/skills/writing-for-agents/agents/openai.yaml https://anymodel.org/en/skills/matt-pocock/writing-for-agents/agents/openai.yaml
curl -fsSL --create-dirs -o ~/.agents/skills/writing-for-agents/SKILL.md https://anymodel.org/en/skills/matt-pocock/writing-for-agents/SKILL.md -o ~/.agents/skills/writing-for-agents/LICENSE https://anymodel.org/en/skills/matt-pocock/writing-for-agents/LICENSE -o ~/.agents/skills/writing-for-agents/SKILL-MECHANICS.md https://anymodel.org/en/skills/matt-pocock/writing-for-agents/SKILL-MECHANICS.md -o ~/.agents/skills/writing-for-agents/agents/openai.yaml https://anymodel.org/en/skills/matt-pocock/writing-for-agents/agents/openai.yaml
foreach ($f in 'SKILL.md','LICENSE','SKILL-MECHANICS.md','agents/openai.yaml') { $p = Join-Path "$HOME\.claude\skills\writing-for-agents" $f; New-Item -ItemType Directory -Force (Split-Path $p) | Out-Null; Invoke-WebRequest "https://anymodel.org/en/skills/matt-pocock/writing-for-agents/$f" -UseBasicParsing -OutFile $p }foreach ($f in 'SKILL.md','LICENSE','SKILL-MECHANICS.md','agents/openai.yaml') { $p = Join-Path "$HOME\.agents\skills\writing-for-agents" $f; New-Item -ItemType Directory -Force (Split-Path $p) | Out-Null; Invoke-WebRequest "https://anymodel.org/en/skills/matt-pocock/writing-for-agents/$f" -UseBasicParsing -OutFile $p }Any other agent: save the file into its skills folder, or give it the link to the file: https://anymodel.org/en/skills/matt-pocock/writing-for-agents/SKILL.md
SKILL.md
Reference for writing any document an agent consumes: a skill, an AGENTS.md / CLAUDE.md, a doc reached by a pointer. The packaging differs; the writing does not: the same levers make each one predictable, since the agent takes the same process every run rather than producing the same output.
When the document you're writing is a skill, read SKILL-MECHANICS.md for frontmatter, invocation choice, and router skills.
Context pointers
A context pointer is a reference held in the agent's context that names some out-of-context material and encodes the condition for reaching it. A skill's description is one; a line in AGENTS.md naming a doc is the same object. The pointer's wording, not its target, decides when the agent reaches the material, and how reliably. A must-have target behind a weakly worded pointer is a variance bug: sharpen the wording first, and inline the material only if sharpening fails.
A pointer does two jobs: state what the material is, and list the branches that should trigger reaching it (a branch is a distinct case the document handles, so different runs take different paths through it). Every word of an always-loaded pointer costs on every turn, so it earns even harder pruning than the body:
- Front-load the leading word: the pointer is where it does its triggering work.
- One trigger per branch. Synonyms that rename a single branch are one branch written twice; collapse them and keep only genuinely distinct branches.
- Cut identity the body already carries.
The two loads
Every document and pointer you add spends one of two budgets:
- Context load is the cost of always-loaded material on the agent's window: an
AGENTS.mdline, a skill description, anything sitting in context every turn, spending tokens and attention whether or not it fires. - Cognitive load is the cost on the human: which documents exist and when to reach for each. The human is the index. Not a cost to minimise: it is the price of human agency; spend it where human judgement matters, remove it where it does not.
Material reached only through a pointer escapes context load at the price of the pointer's own line; material with no pointer at all rides entirely on cognitive load.
Information hierarchy
A document is built from two content types: steps (the ordered actions the agent performs) and reference (definitions, rules, facts consulted on demand). The two mix freely: all steps (a recipe), all reference (a review's rules, this skill), or both. The core decision is where each piece sits on the information hierarchy, a ladder ranked by how immediately the agent needs the material:
- In-file step is the primary tier: what the agent does, in order.
- In-file reference is consulted on demand. Often a legitimately flat peer-set (every rule of a review on one rung), which is a fine arrangement, not a smell.
- Disclosed reference is pushed out into a separate file, reached by a context pointer, loaded only when the pointer fires. Spans a sibling file in the same folder through fully external reference that lives anywhere and any document can point at.
Push too little down and the top bloats; push too much and you hide material the agent actually needs. That tension is the whole decision.
Progressive disclosure is the move down the ladder (out of the main file and behind a pointer) so the top stays legible. Not primarily a token optimisation: it is how the hierarchy is protected. Branching is the cleanest disclosure test: inline what every branch needs, and push behind a pointer what only some branches reach. When a document has steps, in-file reference that should be disclosed buries them and turns attending to them into a coin-flip: a variance lever, not just a legibility one.
Co-location is the within-file companion: where the ladder decides how far down a piece sits, co-location decides what sits beside it once there. Keep a concept's definition, rules, and caveats under one heading rather than scattered, so reading one part brings its neighbours with it. The test: the document should read like documentation written for the agent. Grouped material reads that way; scattered material does not. (Distinct from duplication: that repeats one meaning in two places; scattering fragments one meaning across many.)
Sprawl is the failure mode here: a document simply too long, even when every line is live and unique. Attention thins across the excess, and every extra line is one more to keep relevant. The cure is the ladder: disclose reference behind pointers, and split by branch or sequence so each path carries only what it needs.
Steps and completion criteria
Every step ends on a completion criterion, the condition that tells the agent the work is done. Two properties make it a lever:
- Clarity: can the agent tell done from not-done? A vague bound ("understanding reached") invites premature completion: ending the step before it is genuinely done, attention slipping to being done. The visible steps still ahead (the post-completion steps) supply the pull; the criterion's clarity is the resistance. Defend in order: sharpen the bound first (local and cheap); only if it is irreducibly fuzzy and you observe the rush, hide the later steps by splitting the sequence. Hiding only works across a real context boundary (a hand-off or a subagent dispatch; an inline call leaves the later steps in context and clears nothing).
- Demand: how much it requires. "Every modified model accounted for" forces thorough work where "produce a change list" does not. Demand drives legwork (the digging the agent does within the work, latent in the wording rather than written as its own step), and it is not step-bound: "every rule applied" binds a body of flat reference just as "every step done" binds a sequence, which is how an all-reference document still carries an exhaustiveness bar.
The strongest criteria are both checkable and exhaustive.
When to split
Splitting one document into two spends one of the two loads, so split only when the cut earns it:
- By sequence: split a run of steps where the post-completion steps tempt the agent to rush the one in front of it. Keeping them out of view drives more legwork on the current task. Beware the reverse: merging sequences exposes each step's later steps to what follows, inviting premature completion.
- By invocation, skill-specific: see
SKILL-MECHANICS.md.
Leading words
A leading word is a compact concept already living in the model's pretraining that the agent thinks with while running the document (lesson, fog of war, tracer bullets). Repeated as a token, never as a sentence, it accumulates a distributed definition and anchors a whole region of behaviour in the fewest tokens, by recruiting priors the model already holds. Coining your own works if you define it clearly, but a made-up word recruits no priors: you pay in definition tokens what a pretrained word gives free; reach for an existing word first.
It anchors twice. In the body, execution: the agent reaches for the same behaviour every time the word appears, and inside flat reference it focuses attention on a class of thing to look for. In a pointer, invocation: when the same word lives in your prompts, your docs, and your codebase, the agent links that shared language to the material and reaches it more reliably.
Hunt for opportunities to refactor with leading words. A triad spelled out at three sites, a pointer spending a sentence to gesture at one idea. Each is a passage begging to collapse into a single token:
- "fast, deterministic, low-overhead" → tight (a tight loop).
- "a loop you believe in" → red, turning a fuzzy gate into a binary observable state (the loop goes red on the bug, or it doesn't).
You win twice: fewer tokens, and a sharper hook for the agent to hang its thinking on. Assume every document is carrying restatements that leading words retire. Go find them.
Negation is the failure mode beside this lever: steering by prohibition drags the forbidden behaviour into context and makes it more available, not less. Don't think of an elephant, and the elephant is all there is; the negation is a weak modifier the strongly-activated concept overruns, so the ban half-reads as an instruction to do the thing. Prompt the positive: state the target behaviour ("write one-line comments") so the banned one is never spoken. A prohibition earns its place only as a hard guardrail you cannot phrase positively; even then, pair it with the positive target so attention lands on what to do.
Pruning
- Keep each meaning in a single source of truth: one authoritative place, so changing the behaviour is a one-place edit. Duplication (the same meaning in more than one place) costs maintenance and tokens, and inflates a meaning's prominence on the ladder past its real rank. (The accidental inverse of a leading word, which repeats a token on purpose, never the meaning.)
- The environment is a source of truth too (
package.jsonscripts, config files, the directory layout,--helpoutput), and a document that restates it is a cache: a copy of a lookup, earning its load only when the lookup is expensive. Cache what the agent cannot find by looking: the unwritten convention, the reason behind a choice, the gotcha no config confesses. Leave the one-file, one-command lookups to the environment, where they cannot go stale. - Check every line for relevance: does it still bear on what the document does? A line loses relevance by never bearing on the task (mere exposition, or a branch that should be disclosed) or by going stale as the behaviour or world it describes changes. Shorter documents are easier to keep relevant. Without a pruning discipline the default fate is sediment: stale layers that settle because adding feels safe and removing feels risky, until you must core down through them to find what is still live.
- Hunt no-ops sentence by sentence: an instruction the model already obeys by default pays load to say nothing. The test (does it change behaviour versus the default?) is model-relative, not reader-relative: two people disagreeing about a no-op disagree about the default, and settle it by running the document, not by debate. When a sentence fails, delete the whole sentence rather than trim words from it. The test also grades leading words: a word too weak to beat the default (be thorough when the agent is already thorough-ish) is a no-op, and the fix is a stronger word (relentless), not a different technique.
Connect through AnyModel API
This skill runs on whatever model your agent uses. Point Claude Code, Codex or Cursor at AnyModel to run it on Claude, GPT, Gemini and more with one key — pay per token, no subscription.
AnyModel