Ревью по стандартам и спецификации
Проверяет дифф от коммита, ветки или тега по двум осям в параллельных субагентах: записанные стандарты репозитория с базовым набором запахов кода по Фаулеру и исходная спецификация. Для случаев, когда ветку или PR надо сверить с задачей.
code-review- Автор
- Matt Pocock
- Источник
- mattpocock/skills/skills/engineering/code-review @ abeeaf9
- Лицензия
- MIT · Copyright (c) 2026 Matt Pocock
Об этом скилле
Что делает
Скилл проводит ревью диффа между HEAD и точкой, которую вы назовёте: коммитом, веткой, тегом или main. Оси две, и разделены они намеренно. «Стандарты»: следует ли код правилам, записанным в репозитории? CODING_STANDARDS.md и CONTRIBUTING.md, если они есть, читаются всегда. Поверх них идёт постоянный набор из двенадцати «запахов кода» по Фаулеру — Feature Envy, Speculative Generality и другие. Это всегда повод присмотреться, а не нарушение: правило репозитория их перекрывает, а то, что ловят линтеры, пропускается. «Спецификация»: делает ли код то, о чём просила задача? Сюда идут пропущенные требования, лишнее сверх задачи и требования, сделанные неверно; к каждой находке прикладывается цитата из спецификации.
Каждую ось параллельно проверяет свой субагент со свежим контекстом. Отчёты возвращаются под заголовками ## Standards и ## Spec без слияния и пересортировки, плюс строка с числом находок и самой серьёзной проблемой по каждой оси. Если ссылка на коммит не существует или дифф пуст, работа останавливается до запуска субагентов. Кроме SKILL.md и лицензии в папке только agents/openai.yaml — название и описание для Codex.
Когда включать и когда не надо
Для ветки, PR или незакоммиченной работы, за которыми стоит задача или спецификация: «сделай ревью от main». Спецификацию скилл находит по ссылкам в коммитах вроде #123, по пути, который вы передали, или в docs/, specs/ и .scratch/. Если её нет, ось «Спецификация» пропускается, и отчёт об этом говорит.
Тесты он не запускает и падения не ищет, так что в репозитории без записанных стандартов и без спецификации останется почти только список запахов.
Как поставить и вызвать
Команда установки ниже кладёт всю папку. Агент сам подхватывает скилл по описанию, когда вы просите ревью. Вызвать вручную:
- Claude Code:
/code-reviewили попросить скилл по имени. - Codex:
$code-review. - Cursor: наберите
/в чате Agent и выберитеcode-review.
Пример: /code-review Проверь эту ветку от main. Спецификация — задача #42.
Папка называется code-review — как и встроенная команда Claude Code: установленный как личный, этот скилл заменит встроенную /code-review (встроенное ревью останется доступно как /review). Другой автор может назвать папку своего скилла так же — тогда установка одного заменит другой.
Скиллу нужно знать трекер задач проекта. У автора это настраивает setup-matt-pocock-skills — в нашем каталоге его нет, и можно просто сказать агенту, каким трекером пользоваться. Спецификацию обычно пишет to-spec, а implement-spec заканчивается этим ревью.
Чем отличается от похожих
Ревью пул-реквеста из нашего каталога сначала ищет баги — каждый со сценарием, на котором код ломается, — и сортирует их по серьёзности. Код-ревью по нескольким осям за один проход смотрит пять осей, от корректности до производительности, с метками серьёзности. Запрос код-ревью отправляет одного ревьюера с планом и диапазоном коммитов. Код-ревью по практикам Sentry, второй code-review в каталоге, — чек-лист категорий и правила вежливого ревью, без оси спецификации и без субагентов. Этот скилл сверяет дифф только с тем, что записано, — стандартами и спецификацией — и держит два вердикта порознь, чтобы один не заслонял другой.
Установка
Выполните одну команду — она сохранит SKILL.md и файлы, которые он использует, в папку скиллов агента. Claude Code и Codex подхватывают новый скилл без перезапуска; если скилл не появился, перезапустите агента.
Скилл написан на английском — агент поймёт его и ответит вам по-русски.
curl -fsSL --create-dirs -o ~/.claude/skills/code-review/SKILL.md https://anymodel.org/en/skills/matt-pocock/code-review/SKILL.md -o ~/.claude/skills/code-review/LICENSE https://anymodel.org/en/skills/matt-pocock/code-review/LICENSE -o ~/.claude/skills/code-review/agents/openai.yaml https://anymodel.org/en/skills/matt-pocock/code-review/agents/openai.yaml
curl -fsSL --create-dirs -o ~/.agents/skills/code-review/SKILL.md https://anymodel.org/en/skills/matt-pocock/code-review/SKILL.md -o ~/.agents/skills/code-review/LICENSE https://anymodel.org/en/skills/matt-pocock/code-review/LICENSE -o ~/.agents/skills/code-review/agents/openai.yaml https://anymodel.org/en/skills/matt-pocock/code-review/agents/openai.yaml
foreach ($f in 'SKILL.md','LICENSE','agents/openai.yaml') { $p = Join-Path "$HOME\.claude\skills\code-review" $f; New-Item -ItemType Directory -Force (Split-Path $p) | Out-Null; Invoke-WebRequest "https://anymodel.org/en/skills/matt-pocock/code-review/$f" -UseBasicParsing -OutFile $p }foreach ($f in 'SKILL.md','LICENSE','agents/openai.yaml') { $p = Join-Path "$HOME\.agents\skills\code-review" $f; New-Item -ItemType Directory -Force (Split-Path $p) | Out-Null; Invoke-WebRequest "https://anymodel.org/en/skills/matt-pocock/code-review/$f" -UseBasicParsing -OutFile $p }Другой агент: сохраните файл в его папку скиллов или дайте ему ссылку на файл: https://anymodel.org/en/skills/matt-pocock/code-review/SKILL.md
SKILL.md
Two-axis review of the diff between HEAD and a fixed point the user supplies:
- Standards: does the code conform to this repo's documented coding standards?
- Spec: does the code faithfully implement the originating issue / spec?
Both axes run as parallel sub-agents so they don't pollute each other's context, then this skill aggregates their findings. Start every sub-agent with a fresh context window.
The issue tracker should have been provided to you. If not, tell the user to run /setup-matt-pocock-skills.
Process
1. Pin the fixed point
Whatever the user said is the fixed point (a commit SHA, branch name, tag, main, HEAD~5, etc.). If they didn't specify one, ask for it.
Capture the diff command once: git diff <fixed-point>...HEAD (three-dot, so the comparison is against the merge-base). Also note the list of commits via git log <fixed-point>..HEAD --oneline.
Before going further, confirm the fixed point resolves (git rev-parse <fixed-point>) and the diff is non-empty. A bad ref or empty diff should fail here, not inside two parallel sub-agents.
2. Identify the spec source
Look for the originating spec, in this order:
- Issue references in the commit messages (
#123,Closes #45, GitLab!67, etc.), fetched via the workflow in the tracker doc. - A path the user passed as an argument.
- A spec file under
docs/,specs/, or.scratch/matching the branch name or feature. - If nothing is found, ask the user where the spec is. If they say there isn't one, the Spec sub-agent will skip and report "no spec available".
3. Identify the standards sources
Search the repo for every file that documents how code should be written. When CODING_STANDARDS.md or CONTRIBUTING.md exists, it must be on the list.
On top of whatever the repo documents, the Standards axis always carries the smell baseline below: a fixed set of Fowler code smells (Refactoring, ch.3) that applies even when a repo documents nothing. Two rules bind it:
- The repo overrides. A documented repo standard always wins; where it endorses something the baseline would flag, suppress the smell.
- Always a judgement call. Each smell is a labelled heuristic ("possible Feature Envy"), never a hard violation. Like any standard here, skip anything tooling already enforces.
Each smell reads what it is → how to fix; match it against the diff:
- Mysterious Name: a function, variable, or type whose name doesn't reveal what it does or holds. → rename it; if no honest name comes, the design's murky.
- Duplicated Code: the same logic shape appears in more than one hunk or file in the change. → extract the shared shape, call it from both.
- Feature Envy: a method that reaches into another object's data more than its own. → move the method onto the data it envies.
- Data Clumps: the same few fields or params keep travelling together (a type wanting to be born). → bundle them into one type, pass that.
- Primitive Obsession: a primitive or string standing in for a domain concept that deserves its own type. → give the concept its own small type.
- Repeated Switches: the same
switch/if-cascade on the same type recurs across the change. → replace with polymorphism, or one map both sites share. - Shotgun Surgery: one logical change forces scattered edits across many files in the diff. → gather what changes together into one module.
- Divergent Change: one file or module is edited for several unrelated reasons. → split so each module changes for one reason.
- Speculative Generality: abstraction, parameters, or hooks added for needs the spec doesn't have. → delete it; inline back until a real need shows.
- Message Chains: long
a.b().c().d()navigation the caller shouldn't depend on. → hide the walk behind one method on the first object. - Middle Man: a class or function that mostly just delegates onward. → cut it, call the real target direct.
- Refused Bequest: a subclass or implementer that ignores or overrides most of what it inherits. → drop the inheritance, use composition.
4. Spawn both sub-agents in parallel
Issue both sub-agent calls together, in the foreground, and aggregate the reports they return.
Standards sub-agent prompt should include:
- The full diff command and commit list.
- The list of standards-source files you found in step 3, plus the smell baseline from step 3 pasted in full (the sub-agent has no other access to it).
- The brief: "Report, per file/hunk where relevant, (a) every place the diff violates a documented standard: cite the standard (file + the rule); and (b) any baseline smell you spot: name it and quote the hunk. Distinguish hard violations from judgement calls: documented-standard breaches can be hard, but baseline smells are always judgement calls, and a documented repo standard overrides the baseline. Skip anything tooling enforces. Under 400 words."
Spec sub-agent prompt should include:
- The diff command and commit list.
- The path or fetched contents of the spec.
- The brief: "Report: (a) requirements the spec asked for that are missing or partial; (b) behaviour in the diff that wasn't asked for (scope creep); (c) requirements that look implemented but where the implementation looks wrong. Quote the spec line for each finding. Under 400 words."
If the spec is missing, skip the Spec sub-agent and note this in the final report.
5. Aggregate
Present the two reports under ## Standards and ## Spec headings, verbatim or lightly cleaned. Do not merge or rerank findings, because the two axes are deliberately separate (see Why two axes).
End with a one-line summary: total findings per axis, and the worst issue within each axis (if any). Don't pick a single winner across axes: that's the reranking the separation exists to prevent.
Why two axes
A change can pass one axis and fail the other:
- Code that follows every standard but implements the wrong thing → Standards pass, Spec fail.
- Code that does exactly what the issue asked but breaks the project's conventions → Spec pass, Standards fail.
Reporting them separately stops one axis from masking the other.
Подключить через AnyModel API
Скилл работает на той модели, которую использует агент. Подключите Claude Code, Codex или Cursor к AnyModel и запускайте его на Claude, GPT, Gemini и других моделях по одному ключу — оплата за токены, без подписки.
AnyModel